Clip-On CAN Bus Interface

RLACS182-L__79079_zoom.jpg
DSC_0070__62833_zoom.JPG
RLACS182-L_(Open)__12566_zoom.jpg
RLACS182-L__79079_zoom.jpg
DSC_0070__62833_zoom.JPG
RLACS182-L_(Open)__12566_zoom.jpg

Clip-On CAN Bus Interface

290.00

The Clip-On CAN Bus Interface for Video VBOX will fit all vehicles which utilize CAN Bus. The cable can be installed and removed quickly and easily, however it is not recommended that this is done frequently due to wear that can occur to the clips.

There is no need to make a 'bare-wire' connection to the CAN High and CAN Low wires, therefore no need to cut, splice or remove wire insulation which means it will not invalidate a vehicle warranty.

The Clip-On CAN Bus interface can be used with CAN operating at any voltage and being Omni-directional, this cable will ensure that no intrusive signals are broadcast onto a vehicle CAN bus, preventing the risk of transmitting unwanted data onto the vehicle's CAN bus, which in some cases can cause warning lights to appear on the dash. 

Our CAN database files can be downloaded from here

Add To Cart

Clip on CAN Bus interface for Video VBOX Pro and HD2.

  • Fits all vehicles which utilize a CAN Bus.

  • The cable can be installed and removed from vehicles quickly and easily, and can be used for temporary or permanent installations.

  • There is no need to make 'bare-wire' connections to the CAN High and Low wires, therefore no need to cut splice or remove wire insulation and will not void your vehicle warranty.

  • The Clip on CAN Bus interface can be used with CAN operating at any voltage.

  • Being an omi-directional CAN interface, this cable will ensure that no intrusive signals are broadcast on to a vehicle CAN Bus, preventing the risk of warning lights illuminating on the dash board.

Video Description here: https://www.youtube.com/watch?v=zyozUsTgaRU